| ¡¡ |
Applications of the
SHJ/STJ Series Co-rotating
Twin-screw Extruders
For compounding of all kinds
of fiber-glassed fire-resistant engineering
plastic, special master-batch of anti-virus
season-proof insulation deposition for
special application. Rubber-plastic
compounding, Dyeing of plastic.
Material-processing for deposited film.
Multi-function anti-fog film. Special
material for auto car. Special materials for
house-electric. Material of cable of telecom
and power. TPR warm-plastic. The compounding
of PVC air-proof warm-plastic
adhesive-plaster for alteration.
Plastic alloy
Typical products: PC+ABS, PA+ABS, CPE+ABS,
PP+EPDM, PA+EPDM, PP+SBS
Compounding rubber and plastic
Typical products: PP, PE, PS+SBS, PP, PA +EPDM,
PP+NBR, EVA+silastic, TPR
Plastic staining
Typical products: PE, PP, PS, ABS, EVA, PBT,
PET + coloring agent
Fiber reinforce
Typical products: PP, ABS, EVA, PBT, PA6,
PA66, PPS, POM + long fiber, flocks, carbon
fiber, metal fiber
Master-batch
A . High-ratio
filling master-batch
B . General
class filling: CaCO3, talcum
power,TiO2 can be applied for
filling/The highest filling ratio is 89% at
the same time we can also ensure they can be
dispersed very well.
Typical products: PP, PE + CaCO3,
Mg(OH)2, magnetics, Al(OH)3,
red phosphorus, Sb2O3,
flame retardant
PP, PE + CaCO3, talcum power, TiO2,
carbon black, ABS, PC, PS + Al(OH)3,
PP, PA, ABS + magnetism, ceramic power,
metal power; and carbon black master batch
that is processed by our machine can be used
to produce film
Antibiotic and weather-resisting master
batch: PE + antifog agent, stabilizing agent
C . Carbon
black master-batch: if you process carbon
black master batch with traditional method,
the carbon black will not be dispersed
adequately and the carbon black will make
the fusion of the plastic very difficult.
Using Lantai¡¯s technology all these will be
avoided and you can reduce the dosage of the
wax.
Typical process: PE, EVA, ABS + carbon black
Typical products: carbon black master batch
for producing film and master batch for
producing fiber
D . Degradable
master-batch: PE, PP, PS + amylum (about
80%) + blending agent; light organism couple
degrade master-batch
E . Flame
retardant master-batch: PP, ABS, AS, PBT,
PA, PA66, PPS, POM, PVC + flame retardant
agent + assistant agent
F.
Anti-fog master-batch
Typical products: master-batch for producing
agricultural film: PE + antifog agent,
stabilizing agent. And feeding can be
ensured when you process antifog master
batch. and we can avoid the resin from
spilling from the air vent
Special material
for automobiles
Typical products: PP, ABS, PS, PBT, PET +
fillings and flame retardant, these can be
used to produce collision bumper gauge board
and steering-wheel
Special material for domestic electric
appliance
Typical products: ABS, PP use for television
and icebox
Hermoplasticity elastomer
Modification of TPR, TPU and EVA
Cross-linking
material/one
system can produce PE crossing-linking cable
Extruding and
pelletizing of thermoset
Typical process: compounding and extruding
of phenolics, epoxy plastic and powder
coating.
M odification
and pelletizing of thermoplasticity
elastomer
If
the hardness of the SBS is below PBA50 then
we can use die face pelletizing method and
can get a
good effectiveness.
Our machine can compound
solid and liquid very well
Our system can produce
TPR sole material and icebox seal
Thermally
sensitive and shearing sensitive material
For
these kinds of resins, at first you should
compound them in the twin-screw extruder and
then dischargethem without pressure
then add them into a single screw extruder,
in the single screw the material¡¯s pressure
will be added softly and then the material
will be extruded from the single screw
extruder.
Typical products: PVC, XLPE cable material,
TPE and NBR
Pelletizing for PO
We can provide an integral manufacturing line that can process ten thousand ton
PO a year. Cable and cable jacket material, insulating
material/One system can accomplish the reaction of cross-linking with superoxide
or silicane.Our machine can extrude and pelletize cable jacket materials.
Typical products: HDPE, LDPE, LLDPE, MDPE, PP insulating material and cable
jacket
material.
|
¡¡ |
